Designed for the Toyota Land Cruiser 80 Series 1FZ-FE to replace the often maligned Pesky Heater Hose (PHH). It may look ok from the outside but the inside of the hose tends to fail catastrophically resulting in coolant lose and possible engine damage. Includes: (1) Short section of 5/8" Gates Green Stripe heater hose (2) Constant Torque #10 clamps
Directions: 1. Pull driver's side wheel 2. Remove transmission dipstick 3. Remove plug from knock sensor 4. Cut the PHH in two 5. Cut off the hose to the heater valve 6. Undo the top bolt 7. Twist the rigid line until the bottom tab breaks off 8. Remove the rigid line 9. Remove the remnants of the hose 10. Reinstall new hose to the rigid line 11. Put everything back Installing the Pesky Heater Hose
